Embedded Modul TQMa28L Kleinstes Arm9™ LGA Modul auf Basis von i.MX28 mit guter Grafik und Rechenleistung.

TQMa28L-AB

i.MX283@ 450 MHz, 128 MB DDR2, 8 GB eMMC flash, -25°C…+85°C

TQMa28L-AA

i.MX287@ 450 MHz, 128 MB DDR2, 8 GB eMMC flash, -25°C…+85°C

STKa28-AA

STKa28 (Eval Kit) with TQMa28-AA, i.MX287/450 MHz, 128 MB DDR2, 8 GB eMMC flash, 1x RS232, 1x RS485, GPIO, 4x IN/ 8x OUT, 2x USB 2.0 HOST, 1x ETH 10/100, Stereo Out, Mono Mic In, RTC, Reset button, SD interface, Power Supply, 2 GB SD card, Z-Modem Cable

Please note, that for evaluation purposes we provide you with the starter kit STKa28 with the module TQMa28 (not TQMa28L!). The module mainly differs in the plug system.

STKDT070-AA

7“ Touch-Display, WVGA 800 x 480, 300 cd, Touchpen, Cable set

Starterkit STKa28

The core of the STKa28 is the TQMa28 with an ARM® 9 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.

Please note, that for evaluation purposes we provide you with the starter kit STKa28 with the module TQMa28 (not TQMa28L!). The module mainly differs in the plug system.

Other configurations on request